spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 189 filtered modular jack connectors protecting signals from electromagnetic interference (emi) is now more important than ever. spectrum control gives you more choices in keeping your signals clean and free of emi. whatever the level of protection your application requires, we offer signal conditioning products that meet any level of price and performance. these compact, low-cost, filtered printed circuit board rj45 modular jack connectors from spectrum control offer an inexpensive way to protect equipment from conducted and radiated electromagnetic interfer- ence (emi), while meeting all appropriate performance requirements. offering compact size and high reliability, these new connectors are fully intermateable and interchangeable with existing standard product. the low profile and narrow width of the multi-port style allows more ports to be packed into less space. ferrite filtered versions can be supplied in fully shielded, partially shielded or unshielded versions. redundant shielding tabs ensure that a low impedance ground path is maintained across the interface; tabs are available in board-ground or panel-ground versions, with panel-ground jacks also incorporating board-ground legs. these flame retardant polyester thermoplastic connectors are compatible with wave solder environments, and employ duplex plated contacts with solder tails. modular jack connectors assist with fcc part 15 a & b; and cispr 22 compliance. applications for this type of connector are widely diversified and include: lans, wans, network cards, broadband transmission equipment, workstations, peripherals, fax/modems, copy machines and multiplexing. features lower installed cost assists with fcc part 15 a & b; and cispr 22 compliance drop-in replacement, matched footprint all circuit lines protected inductor or capacitor versions available with two grounding options ?pcb or parallel unshielded, partial or fully shielded versions certified by canadian standards association file no. lr 7189 certified by underwriters laboratories, inc., file number e81956 equivalent circuit (ferrite version) typical impedance vs. frequency (ferrite version) 30 20 10 0 1 10 100 1000 frequency (mhz) impedance (ohm) 8-position 70 60 50 40 30 20 10 0 1 10 100 1000 frequency (mhz) impedance (ohm) 80 90 100 110 120 multi-port filtered connectors *1566 printer 171-241 v2 12/4/06 11:30 am page 16
spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 190 filtered modular jack connectors ordering information example: 56-a52-002-1130 56 - a 5 2 - 002 - 1 1 3 0 shell size 1 = 8 position/1 port 2 = 8 position/2 port 3 = 8 position/4 port 4 = 8 position/6 port 5 = 8 position/8 port 6 = 6 position/1 port grounding 0 = panel ground 1 = pcb ground 2 = customer specified multi port only 0 =n/a 3 = 3 ground tab 5 = 5 ground tab multi port only 0 =n/a 1 = +.180 side ground 2 = -.120 side ground options k = keyed (low profile) 0 =n/a filtering 000 = no filter 001 = ferrite filtered d-subminiature connectors modular jack type 1 = multi port, no shield 2 = multi port, shielded 3 = low profile, no shield, no panel stops 4 = low profile, panel stops 5 = low profile, partial shielded 6 = low profile, extended shield 7 = low profile, full shield 8 = coupled typical dimensions for 56-a17-002-0000 dimensions in inches (mm) filtered connectors note: not all configurations available for every size, consult factory for availability *1566 printer 171-241 v2 12/4/06 9:42 am page 17
spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 191 filtered modular jack connectors filtered connectors photo of vertical and ganged mod jacks typical dimensions for 56-a18-005-1000 vertical mod jack dimensions in inches (mm) typical dimensions for 56-a52-002-0130 ganged mod jack dimensions in inches (mm) *1566 printer 171-241 v2 12/4/06 9:42 am page 18
|
